How to limit a security DVR user only see specific cameras?

[CCTV Professional]

For all DVR model DVR8516

Step 1:
Log in client software. (CMS software)
(admin ID: SYSTEM, password: 123456)


(If you didn't connect your DVR yet, click 'system config' -> 'device manager' -> 'add device' (it's a green button at the top), after you connect your DVR, click 'Live' to check if your video work properly.)


Step 2:
Cilck 'system config' -> 'user manager'
(at right side banner)

Step 3:
Click buton 'add user', and setup a user name (this is the ID when user log in)

Step 4:
In the 'Live' section, limit the cameras.

Step 5:
Test your limited video using the user ID you just setup.

[CCTV Professional]

This is the view by limited user

[CCTV Professional]

Tips:
1. You need to install this software called CMS in your computer.
2. You can't install any softwre in your DVR.


----------------------------------------------------------

Setting steps:
1. You need to do network setting for your DVR.
2. Connect CMS with DVR.
3. Do the setting in CMS.