Page 1 of 1

Don't need to do port forwarding, Try our UPNP Function

PostPosted: Sat Dec 15, 2012 1:30 pm
by CCTV Professional
You don't need to do port forwarding for most of situations.

Please come to DVR menu -> network page, enable UPNP function.

By default, most of router has enabled UPNP function (it's a single check box somewhere located in your router), If not, please login your router, then enable it.

After you enable UPNP, your DVR ports should be opened automatically, you can check if the ports are open is below link:

http://cctvdirectbuy.com/download/tech/port_check.htm