Geovision® GV-AS210 Controller

Model: GV-AS210

$499.99
Sale: $399.99
Save: $100.00 off

Add to Cart:      



Geovision Access Control

Features

  • Support 4 Wiegand Card Readers of 26 To 64 Bits
  • Support 8 GV-Readers and GV-GF Fingerprint Readers Through RS-485 Connection
  • Built-In 8 Inputs and 8 Relay Outputs
  • Suitable For Door, Parking and Elevator Access Control
  • One-Way Control: 4 Doors
  • Two-Way Control: 2 Doors by Wiegand, 4 Doors by Wiegand and RS-485

Specifications


System Requirements

GV-ASManager Version

GV-ASManager V4.0 / 4.1

Hardware

CPU

32-bit ARM7TDMI

Number of User Cards

40,000 Cards

Event Buffer

1,000,000 Events and Log Data

Power

AC 100~250 V , 50~60Hz

Reader Port

4 Wiegand Interfaces
1 RS-485 Interface Only For GV-Readers and GV-GF Fingerprint Readers (max. 8 GV-Readers)

Wiegand Interface

26~64 Bit Format
12V DC Power Supply, 200mA

Communication

TCP/IP

Input

8 Inputs, Dry Contact, NO

Output

8 Relay Outputs (30VDC, 3A; 110V AC ~ 250V AC, 3A)

Operating Temperature

0 ~ 65 °C / 32 ~ 149 °F

Operating Humidity

10% ~ 90% RH (non-condensing)

Dimension (W x H x D)

210 x 204 x 46.6 mm / 8.27 x 8.03 x 1.83 in (Base Plate Included)

Weight

700 g / 1.54 lb (Base Plate Included)

Certification

CE, FCC, RoHS

Note:
Specifications are subject to change without notice.

Options
Optional devices can expand the capabilities and versatilities of your GV-AS Controllers. Consult your sales representative for more information.

GV-Reader

The reader has both Wiegand and RS-485 outputs that can be connected to any standard access control panel. 125kHz and 13.56MHz GV-Readers are available.

GV-RK1352

GV-RK1352 is a card reader with keypad that uses a 13.56 MHz frequency. The reader has both Wiegand and RS-485 outputs that can be connected to any standard access control panel.

GV-R1352

GV-R1352 is a card reader that uses a 13.56 MHz frequency. The reader has both Wiegand and RS-485 outputs that can be connected to any standard access control panel.

GV-DFR1352

GV-DFR1352 is a card reader that uses a 13.56 MHz frequency. The reader has both Wiegand and RS-485 outputs that can be connected to any standard access control panel.

GV-GF Fingerprint Reader

The reader supports three operation modes: Fingerprint Only, Fingerprint + Card and Card Only. In Fingerprint Only mode, the fingerprints are enrolled through GV-ASManager. In Fingerprint + Card mode, the fingerprint templates are stored on the user card. In Card Only mode, the users only need to swipe the card to be granted access. Readers with optical and capacitance sensors are available.

GV-CR420

GV-CR420 is a card reader with a built-in 4MP wide angle IP camera. The card reader recognizes identification cards and transmits live view through network connection.

Push Button Switch

The push button switch can be integrated with access control system, allowing door exit by momentarily activating or deactivating the electric locking device. Both American standard and European standard push buttons are available.

GV-IB25 / 65 / 85 Infrared Button

The GV-IB25 / 65 / 85 Infrared Button detects infrared movement within 3 to 12 cm and allows you to open the door with a wave of hand.

Electric Lock

Three types of electric locks are available: electromagnetic lock, electric bolt and electric strike.

GV-AS ID Card & GV-AS ID Tag

GV-AS ID Cards and GV-AS ID Tags are ideal for business and residential environment, where access control is important for security reasons. 125 kHz and 13.56 MHz cards and tags are available.




Official PayPal Seal
Translate this Page:
Your IP Address is: 54.211.212.174
2007-2010 CCTVDirectBuy.com. All rights reserved.