Geovision® GV-AS120 Controller with Built-In Reader

Model: GV-AS120

$201.24
Sale: $160.99
Save: $40.25 off

Add to Cart:      



Geovision Access Control

Introduction

Working as a standalone solution, GV-AS120 is a card reader and also a single door controller. It is possible to add one more card reader to GV-AS120 for entry and exit applications. GV-AS120 has the capability to store up to one thousand cards. When GV-AS120 is being used as a standalone unit, the programming is done from the software GV-ASManager through the RS-485 connection. GV-AS120 is suitable not only for any normal door control but also for parking gate and elevator control. GV-AS120 is an economic solution for access control.


Features

  • 1,000 / 40,000 Cards (Standalone / Networked or RS-485 Mode)
  • Built-in 2 Digital Inputs and 1 Relay Output
  • 1 Wiegand Output (26 ~ 64 Bits) For Extra Reader Programming
  • 1 Door Expandable To 2 Doors With Optional GV-ASBox
  • Built-In Tampering Alarm
  • Weather-Proof and IP66-Compliant Housing (For Outdoor Use)
  • Built-In 13.56MHz Reader

Specifications


System Requirements

GV-ASManager Version

GV-ASManager V4.0 / 4.1

Hardware

CPU

32-bit RISC microprocessor

Number of User Cards

1,000 / 40,000 cards (Standalone / Networked or RS-485 Mode)

Event Buffer

65,536 Events and Log Data

Power

100 ~ 240V AC, 50 ~ 60Hz

Frequency

13.56 MHz for ISO14443A (MIFARE DESFire, MIFARE Plus and MIFARE Classic)

Wiegand Interface

1 Wiegand Interface, 26~64 Bit Format
12V DC Power Supply, 200mA

Communication

RS-485

Input

2 Inputs, Dry Contact, NO / NC

Output

1 Outputs

Operating Temperature

-20 °C ~ 60 °C / -4 °F ~ 140 °F

Operating Humidity

10% ~ 90% RH (non-condensing)

Dimension (W x H x D)

65.8 x 115.6 x 20.5 mm / 2.6 x 4.6 x 0.8 in

Weight

138 g / 0.3 lb

Certification

CE, FCC, RoHS

Note:
Specifications are subject to change without notice.

Options
Optional devices can expand the capabilities and versatilities of your GV-AS Controllers. Consult your sales representative for more information.

GV-Reader

The reader has both Wiegand and RS-485 outputs that can be connected to any standard access control panel. 125kHz and 13.56MHz GV-Readers are available.

GV-RK1352

GV-RK1352 is a card reader with keypad that uses a 13.56 MHz frequency. The reader has both Wiegand and RS-485 outputs that can be connected to any standard access control panel.

GV-R1352

GV-R1352 is a card reader that uses a 13.56 MHz frequency. The reader has both Wiegand and RS-485 outputs that can be connected to any standard access control panel.

GV-DFR1352

GV-DFR1352 is a card reader that uses a 13.56 MHz frequency. The reader has both Wiegand and RS-485 outputs that can be connected to any standard access control panel.

GV-GF Fingerprint Reader

The reader supports three operation modes: Fingerprint Only, Fingerprint + Card and Card Only. In Fingerprint Only mode, the fingerprints are enrolled through GV-ASManager. In Fingerprint + Card mode, the fingerprint templates are stored on the user card. In Card Only mode, the users only need to swipe the card to be granted access. Readers with optical and capacitance sensors are available.

GV-CR420

GV-CR420 is a card reader with a built-in 4MP wide angle IP camera. The card reader recognizes identification cards and transmits live view through network connection.

GV-ASBox

Only works with GV-AS100 / 110 / 120. The device can add Network function, 1 Wiegand interface, 8 additional inputs and outputs to GV-AS100, GV-AS110 and GV-AS120.

GV-ASNet

Only works with GV-AS100 / 110 / 120. This device can add Network function to GV-AS100, GV-AS110 and GV-AS120.

GV-Hub

Only works with GV-AS100 / 110 / 120. GV-Hub can convert the standard RS-232 signal of up to 4 controllers to RS-485, allowing the controllers to connect to computers.

GV-COM

Only works with GV-AS100 / 110 / 120. GV-COM can convert the standard RS-232 signal of one controller to RS-485, allowing the controller to connect to a computer.

GV-Net / IO Card

Only works with GV-AS100 / 110 / 120. GV-Net / IO Card can convert the standard RS-232 signal of one controller to RS-485, allowing the controller to connect to a computer.

Push Button Switch

The push button switch can be integrated with access control system, allowing door exit by momentarily activating or deactivating the electric locking device. Both American standard and European standard push buttons are available.

GV-IB25 / 65 / 85 Infrared Button

The GV-IB25 / 65 / 85 Infrared Button detects infrared movement within 3 to 12 cm and allows you to open the door with a wave of hand.

Electric Lock

Three types of electric locks are available: electromagnetic lock, electric bolt and electric strike.

GV-AS ID Card & GV-AS ID Tag

GV-AS ID Cards and GV-AS ID Tags are ideal for business and residential environment, where access control is important for security reasons. 125 kHz and 13.56 MHz cards and tags are available.




Official PayPal Seal
Translate this Page:
Your IP Address is: 23.23.57.144
2007-2010 CCTVDirectBuy.com. All rights reserved.